Should I paint oak trim white? : Why and How

Introduction

 

Modifying your house as per your taste is what really makes it a home. But the modification comes with a lot of questions and confusion. Should I paint oak trim white is a question that a lot of us have if we shift to a new home or want to modify our present one.

Oak trims may be a look of its own but if you want to add a clean, modernistic touch to your house then painting your oak trim white is a big yes.

White is a color that easily complements most colors and creates an illusion of a bigger space. Painting your oak trim white will not only do both of those things but will also add a modern touch to your room.

However, the painting could be a challenge if you don’t know what you’re doing.

But don’t worry! We’re here to help you out with that. So if you want to know how to do it in the right way, then keep on reading.

Let’s get started.

 

Steps to follow to paint oak trim white

 

Now that you’ve decided whether or not you want to paint your oak trim you should now know how to do it. Sure you can use professional help to get it done. But it really takes a few simple steps and basic materials for you to do it by yourself.

We noted down the entire process into easy steps that you can do by yourself to paint your oak trim white.

 

Tools needed

 

The tools that you will be needing to execute this project:

1. Cleaning cloth
2. Degreaser or vinegar solution
3. Wood putty
4. Putty knife
5. Caulk
6. Sandpaper
7. Microfibril cloth
8. Primer
9. Tape
10. Color
11. Wax
12. Cheesecloth

 

Step 1:Clean the surface

 

Cleaning your working surface before starting any painting project is very crucial. So cleaning your wooden trim is crucial as well.

You can use any cloth or vacuum to get rid of loose dust that adheres to the surface. But to further clean it thoroughly, use a good quality degreaser or any other cleaning solvent that is wood friendly to clean the oak surface. If you don’t like using chemical products then you can use a solution of water and white vinegar. It will work just as fine.

Spray the cleaning solvent all over the oak then wipe it down with any regular towel or cloth. Give it some time to dry down completely before carrying on with the next step.

Step 2:Prep the surface

 

If the oak trim has nail holes or gauges have taken out, you need to take care of those factors and prepare the surface.

 

Fill in holes

 

For holes use wood putty to fill it in. Then use a putty knife to smooth it out into a clean finish. For filling in any hollow space between the trim and the floor or ceiling or wall use a good quality caulk.

 

Use sandpaper

 

After the wood putty and caulk dries down use sandpaper all over the surface to prep it completely. The sandpaper will smoothen the surface and get rid of any shiny finishing on your wood. This will help to adhere the paint better on the oak surface. After using the sandpaper use a microfibril cloth to get rid of the dust.

Step 3:Tape the sides

 

For a clean finish and to avoid paint in unwanted places you should always tape the sides of your oak trim that is open to another surface.

If you have a carpeted floor or any other floor that you want to avoid any splatter of paint on then make sure to tape that side of the trim. Place the tape firmly fitted into each corner.

This will not only avoid the paint from splattering on the floor but will also give a clean finish. If you don’t plan on painting your walls and don’t want any paint on the wall then you can use less adhesive tape for the wall that won’t remove any paint from its surface.

Step 4:Prime the surface

 

Priming is crucial before painting any surface. The same goes for oak trims.

Use a good quality primer over the wooden surface to have any paint adhere properly onto the surface and for it to dry properly. Use a paintbrush to put an even coat of primer all over the oak trim/ Let the primer dry properly before going on with the paint.

Step 5:Color the surface

 

Coloring might be the most fun part but you need to make sure that you’re following the right steps while doing it or it can easily turn into a mess.

Use a smooth paintbrush to put on the color over the oak trim. It is important for you to not use a worn-out paintbrush or it will give an uneven finish and you will need to do multiple coats.

After painting one coat let that dry completely. No matter how tempted you are you should have to go in for the second coat with the first one dring properly or it could take more than usual time for the paint to dry down. The number of coats of paint depends on your preference for the transparency of the paint.

Step 6:Wax the surface

 

Waxing the painted surface makes sure that the paint lasts longer and also makes it easier to clean it.

After the paint dries down completely use a cheesecloth to spread the finishing wax all over the trim. It is crucial for you to let one coat dry down before going on with another. It might take twenty-four to forty-eight hours for the coat to dry completely. Two coats of wax are enough for this step.

Conclusion

 

You shouldn’t shy away from making changes to your house to add your own touch or make it more modern. That includes painting your oak trims. These changes are what will make your house more like home. So if you’re wondering “Should I paint oak trim white?”

Yes, you should.

We hope our article helped you to know how to do it in the right way to get your desired results.

Thank you for being patient and staying with us till the end.

Share on facebook
Facebook
Share on google
Google+
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest

Leave a Comment

Your email address will not be published. Required fields are marked *